New Generation, New Prospect in Plastic Converting Industry

2022-10-17

Kang Chyau has always been a leader in the field of Blown Film Machinery, not to mention how satisfying it is in terms of customization. The times are progressing and technology is innovating. This company with about 35 years of technology and experience has never neglected its pace.

At the K-show exhibition this year(2022) in Germany, Kang Chyau is promoting the 3-layer blown film machines model: KMTL-55-65-55 E3. In order to meet the multi-variability of the current production of films and bags. It also serves the purpose of producing biodegradable products which are increasingly concerned by the EU and formulating relevant regulations.

The biggest advantage of 3-layer blown film applies to many packaging products with variations and lower costs. For example, we put 100% recycled material in the B layer and put 100% new material in the A and C layers. The proportion of A & C layers can be distributed during production and increasing layer B's proportion would still maintain high-quality productions. This can avoid the problem of poor quality products by using a high proportion of recycled materials.

This logic also works in high-quality packaging films. If we distribute the layers in the following arrangement (A/B/C Layer: LDPE/HDPE/LDPE), the film produced will have the high sealing properties of LDPE, and the high strength and tinting properties of HDPE.

In the above, there is little mention of the EU's concern for environmental protection, carbon footprint, and carbon rights emissions have also been the subject of much discussion in recent years. Kang Chyau has also noticed it and upgraded their motor and electronic control system in their blown film machines. This allows customers to save power usage during production, reducing about 10~20% of electricity usage. All the efforts are dedicated to reducing carbon emissions.

Kang Chyau is a company that constantly requires progress in its technology. For instance, they have served a corporation in California for over a decade. This environmentally friendly company would only use biodegradable material (PLA), in the beginning, the film width of the machine is only 50cm and the output is only half of PE material. After continuous improvement and quality requirements, the current PLA machine can already achieve a film width of 1m which is better than the previous output.

Although this year has been a challenging year for global trade, there are many external factors such as the Ukrainian-Russian war, high inflation, and economic recession. But we believe in insisting on making good products and constantly renovating technology. Sooner or later we will get through this difficult time and fulfill the needs of more customers.

Source: PRM-Taiwan BLOG

News

Categories